基于混合编程技术的AOCC应用软件快速仿真平台

介绍基于混合编程技术的AOCC应用软件的快速仿真平台的整体框架设计以及具体实现．基于该方法构建的快速仿真平台，能够满足软件开发人员对基于8086汇编语言开发的AOCC应用软件开、闭环调试和测试的要求，对提高软件的开发效率和保证软件的质量有积极意义．     

Determination of station positions and velocities from laser ranging observations to Ajisai,Starlette and Stella satellites

The positions and velocities of the four Satellite Laser Ranging (SLR) stations: Yarragadee (7090), Greenbelt (7105), Graz (7839) and Herstmonceux (7840) from 5-year (2001–2005) SLR data of low orbiting satellites (LEO): Ajisai, Starlette and Stella were determined. The orbits of these satellites were computed from the data provided by 20 SLR stations. All orbital computations were performed by means of NASA Goddard’s GEODYN-II program. The geocentric coordinates were transformed to the topocentric North–South, East–West and Vertical components in reference to ITRF2005. The influence of the number of normal points per orbital arc and the empirical acceleration coefficients on the quality of station coordinates was studied. To get standard deviation of the coordinates determination lower than 1 cm, the number of the normal points per site had to be greater than 50. The computed positions and velocities were compared to those derived from LAGEOS-1/LAGEOS-2 data. Three parameters were used for this comparison: station coordinates stability, differences from ITRF2005 positions and velocities. The stability of coordinates of LEO satellites is significantly worse (17.8 mm) than those of LAGEOS (7.6 mm), the better results are for Ajisai (15.4 mm) than for Starlette/Stella (20.4 mm). The difference in positions between the computed values and ITRF2005 were little bit worse for Starlette/Stella (6.6 mm) than for LAGEOS (4.6 mm), the results for Ajisai were five times worse (29.7 mm) probably due to center of mass correction of this satellite. The station velocities with some exceptions were on the same level (≈1 mm/year) for all satellites. The results presented in this work show that results from Starlette/Stella are better than those from Ajisai for station coordinates determination. We can applied the data from LEO satellites, especially Starlette and Stella for determination of the SLR station coordinates but with two times lower accuracy than when using LAGEOS data.     

地球同步卫星轨道漂移对天线指向的影响分析

位于地球同步轨道的卫星由于受各种空间因素的影响，其运行轨道会随时间逐渐偏离地球赤道面．轨道倾角由0°逐渐增大。这种轨道倾角漂移会导致对地通信的固定波束天线指向偏离地面站，引起天线指向失配误差，造成通信质量下降甚至丧失。文章分析了轨道漂移对天线指向的影响，并给出了天线指向调整的策略。     

频谱分析法在静止气象卫星调焦分析中应用研究

利用频谱分析方法，对静止气象卫星扫描辐射计的在轨调焦进行快速、准确的分析判断，确定是否需要调整及调整时所发遥控命令的调整方向和步长等，避免了单向调出焦距极限位置时，对辐射计造成永久性损坏。文章首次提出的二维频谱法，即使在图像定位精度不高的情况下仍然适用，可以得出准确的分析结果。     

连续推力机动轨道优化设计的贝塞尔曲线法

提出一种基于贝塞尔曲线的平面机动轨道设计方法。该方法将贝塞尔曲线方程与轨道形状方程相结合，利用得到的复合函数作为轨道方程来对机动轨道进行数学描述；通过约束条件获得可行的机动轨道族，由控制点设计给出具体的优化变量，将累积速度增量作为优化指标函数；并利用优化算法完成参数优化，从而得到最优机动轨道。最后针对设计的机动轨道推力峰值较大的问题，进一步提出了分段贝塞尔曲线法，在降低推力峰值的同时，可进一步降低燃料消耗，并在平面机动转移轨道设计的基础上，通过梯度下降对自由控制点进行修正，解决了考虑时间约束的平面轨道交会问题。     

圆轨道星座全球覆盖的充分必要条件

对采用圆轨道的星座，目前的研究基本上局限于实际应用方面，很少进行理论方面的研究，本文首次提出并证明了达到全球连续多重覆盖的充要条件。这对进行星座设计具有积极的指导意义。     

Crew autonomy for deep space exploration: Lessons from the Antarctic Search for Meteorites

Future piloted missions to explore asteroids, Mars, and other targets beyond the Moon will experience strict limitations on communication between vehicles in space and control centers on Earth. These limitations will require crews to operate with greater autonomy than any past space mission has demonstrated. The Antarctic Search for Meteorites (ANSMET) project, which regularly sends small teams of researchers to remote parts of the southern continent, resembles a space mission in many ways but does not rely upon a control center. It provides a useful crew autonomy model for planners of future deep space exploration missions. In contrast to current space missions, ANSMET gives the crew the authority to adjust competing work priorities, task assignments, and daily schedules; allows the crew to be the primary monitor of mission progress; demands greater crew accountability for operational errors; requires the crew to make the most of limited communication bandwidth; adopts systems designed for simple operation and failure recovery; and grants the crew a leading role in the selection and stowage of their equipment.     

月食对环月卫星运行影响及对策分析

从月食与环月卫星的关系出发，讨论了月食对卫星的影响机理。针对如何尽量缩短卫星进入地影时间的问题，给出了相位调整的概念和原理，同时介绍了卫星有效进影时间的概念，说明了相位调整方法的可行性。最后通过实例应用给出了相位调整的效果。文章所介绍的分析和控制方法对于环月卫星具有较广泛的适用性，可以在我国后续的月球探测任务中作为参考依据。     

基于混合遗传算法的多冲量最优变轨

针对航天器多冲量最优变轨问题,建立了多冲量最优变轨的数值优化模型,给出了一种遗传算法(GA)与序列二次规划算法(SQP)结合的混合优化算法.该算法不需初值猜测,全局和局部搜索能力强并且计算效率高.仿真计算了燃料最优交会和时间最短拦截问题,比较了GA,SQP以及混合遗传算法的性能.针对混合遗传算法得到的不同冲量次数变轨的优化结果,分析了冲量次数对变轨性能指标的影响.结果表明混合遗传算法综合性能最高,冲量次数对不同性能指标的影响不同.仿真算例验证了模型和算法的有效性.     

超低轨道地球卫星脉冲星/星光折射/光谱组合导航

针对超低轨道地球卫星导航自主需求,提出了一种脉冲星/星光折射/光谱测速组合天文导航方法。首先根据地球超低轨道卫星运行轨道动力学方程建立导航系统状态模型;分别根据脉冲到达时间差和星光折射角与天体光谱频率建立导航系统量测模型;使用Unscented卡尔曼滤波方法,降低随机误差对导航精度的影响,使用基于UKF的信息融合方法,有效融合了三种天文导航方法结果数据。经计算机仿真分析,该组合导航方法位置导航误差均值为85.62m,速度误差均值0.190m/s,能够满足超低轨道地球卫星在轨运行导航需求。